Necklace Band Saw Box Patterns

Designer Woods band saw box patterns are available for the Necklace Jewelry Boxes category here.   The  pattern for each of the necklace boxes pictured below is available for purchase through Pay Pal.  With each pattern, I will now include access to a video on how to make the special drawers in the necklace box.

Also available for purchase are separate printed  instructions for the Hidden Drawer or for building a  Small Trinket Band Saw Box.

 

Secure by Paypal

Model – 32 | Star of David Pattern

Model - 32 | Star of David Pattern

*
1) My patterns are not set to ship automatically. As soon as I receive the order, I will send the pattern in PDF format attached to an e-mail.
2) This pattern is cut from a block made up of four 4/4” boards. Giving a total thickness of approximately 3 1/2”.
3) When using a 14″ or smaller band saw, this pattern requires a 6″ riser block or extension in order to completely cut out the box.

Model – 29 | Guitar Box Pattern

Model - 29 | Guitar Box Pattern

*
1) My patterns are not set to ship automatically. As soon as I receive the order, I will send the pattern in PDF format attached to an e-mail.
2) This pattern is cut from a block made up of four 4/4” boards. Giving a total thickness of approximately 3 1/2”.
3) When using a 14″ or smaller band saw, this pattern requires a 6″ riser block or extension in order to completely cut out the box.

Model – 37 | The Old Rugged Cross Pattern

Model - 37 | The Old Rugged Cross Pattern

*
1) My patterns are not set to ship automatically. As soon as I receive the order, I will send the pattern in PDF format attached to an e-mail.
2) This pattern is cut from a block made up of four 4/4” boards. Giving a total thickness of approximately 3 1/2”.
3) When using a 14″ or smaller band saw, this pattern requires a 6″ riser block or extension in order to completely cut out the box.

Model – 40 | Locomotive Pattern

Model - 40 | Locomotive Pattern

*
1) My patterns are not set to ship automatically. As soon as I receive the order, I will send the pattern in PDF format attached to an e-mail.
2) This pattern is cut from a block made up of four 4/4” boards. Giving a total thickness of approximately 3 1/2”.
3) When using a 14″ or smaller band saw, this pattern requires a 6″ riser block or extension in order to completely cut out the box.

Model – 25 | PEACE Sign Shape with 3 Drawers Pattern

Model - 25 | PEACE Sign Shape with 3 Drawers Pattern

*
1) My patterns are not set to ship automatically. As soon as I receive the order, I will send the pattern in PDF format attached to an e-mail.
2) This pattern is cut from a block made up of four 4/4” boards. Giving a total thickness of approximately 3 1/2”.
3) When using a 14″ or smaller band saw, this pattern requires a 6″ riser block or extension in order to completely cut out the box.

Model – 24 | Fire Engine Pattern

Model - 24 | Fire Engine Pattern

*
1) My patterns are not set to ship automatically. As soon as I receive the order, I will send the pattern in PDF format attached to an e-mail.
2) This pattern is cut from a block made up of four 4/4” boards. Giving a total thickness of approximately 3 1/2”.
3) When using a 14″ or smaller band saw, this pattern requires a 6″ riser block or extension in order to completely cut out the box.

Model – 31 | Star Pattern

Model - 31 | Star Pattern

*
1) My patterns are not set to ship automatically. As soon as I receive the order, I will send the pattern in PDF format attached to an e-mail.
2) This pattern is cut from a block made up of four 4/4” boards. Giving a total thickness of approximately 3 1/2”.
3) When using a 14″ or smaller band saw, this pattern requires a 6″ riser block or extension in order to completely cut out the box.

Model – 39 | Scotty Pattern

Model - 39 | Scotty Pattern

*
1) My patterns are not set to ship automatically. As soon as I receive the order, I will send the pattern in PDF format attached to an e-mail.
2) This pattern is cut from a block made up of four 4/4” boards. Giving a total thickness of approximately 3 1/2”.
3) When using a 14″ or smaller band saw, this pattern requires a 6″ riser block or extension in order to completely cut out the box.

Model – 28 | Ol’ Paint Pattern

Model - 28 | Ol' Paint Pattern

*
1) My patterns are not set to ship automatically. As soon as I receive the order, I will send the pattern in PDF format attached to an e-mail.
2) This pattern is cut from a block made up of four 4/4” boards. Giving a total thickness of approximately 3 1/2”.
3) When using a 14″ or smaller band saw, this pattern requires a 6″ riser block or extension in order to completely cut out the box.

Model – 23 | Kitty Pattern

Model - 23 | Kitty Pattern

*
1) My patterns are not set to ship automatically. As soon as I receive the order, I will send the pattern in PDF format attached to an e-mail.
2) This pattern is cut from a block made up of four 4/4” boards. Giving a total thickness of approximately 3 1/2”.
3) When using a 14″ or smaller band saw, this pattern requires a 6″ riser block or extension in order to completely cut out the box.

Model – 26 | My Valentine Pattern

Model - 26 | My Valentine Pattern

*
1) My patterns are not set to ship automatically. As soon as I receive the order, I will send the pattern in PDF format attached to an e-mail.
2) When using a 14″ or smaller band saw, this pattern requires a 6″ riser block or extension in order to completely cut out the box.

Model – 5 | Four Drawer Chest Pattern

Model - 5 | Four Drawer Chest Pattern

*
1) My patterns are not set to ship automatically. As soon as I receive the order, I will send the pattern in PDF format attached to an e-mail.
2) This pattern is cut from a block made up of four 4/4” boards. Giving a total thickness of approximately 3 1/2”.
3) When using a 14″ or smaller band saw, this pattern requires a 6″ riser block or extension in order to completely cut out the box.

Model – 12 | Three Drawer | Oval Box Pattern

Model - 12 | Three Drawer | Oval Box Pattern

*
1) My patterns are not set to ship automatically. As soon as I receive the order, I will send the pattern in PDF format attached to an e-mail.
2) This pattern is cut from a block made up of four 4/4” boards. Giving a total thickness of approximately 3 1/2”.
3) When using a 14″ or smaller band saw, this pattern requires a 6″ riser block or extension in order to completely cut out the box.

Model – 35 | Yin Yang | Two Drawer Pattern

Model - 35 | Yin Yang | Two Drawer Pattern

*
1) My patterns are not set to ship automatically. As soon as I receive the order, I will send the pattern in PDF format attached to an e-mail.
2) This pattern is cut from a block made up of four 4/4” boards. Giving a total thickness of approximately 3 1/2”.
3) When using a 14″ or smaller band saw, this pattern requires a 6″ riser block or extension in order to completely cut out the box.

Model – 20 | The Boulders | Two Drawer Pattern

Model - 20 | The Boulders | Two Drawer Pattern

*
1) My patterns are not set to ship automatically. As soon as I receive the order, I will send the pattern in PDF format attached to an e-mail.
2) This pattern is cut from a block made up of four 4/4” boards. Giving a total thickness of approximately 3 1/2”.

Model – 30 | Cruiser | Two Drawer Pattern

Model - 30 | Cruiser | Two Drawer Pattern

*
1) My patterns are not set to ship automatically. As soon as I receive the order, I will send the pattern in PDF format attached to an e-mail.
2) This pattern is cut from a block made up of four 4/4” boards. Giving a total thickness of approximately 3 1/2”.
3) When using a 14″ or smaller band saw, this pattern requires a 6″ riser block or extension in order to completely cut out the box.

Model – 27 | Open Space | Two Drawer Pattern

Model - 27 | Open Space | Two Drawer Pattern

*
1) My patterns are not set to ship automatically. As soon as I receive the order, I will send the pattern in PDF format attached to an e-mail.
2) This pattern is cut from a block made up of four 4/4” boards. Giving a total thickness of approximately 3 1/2”.
3) When using a 14″ or smaller band saw, this pattern requires a 6″ riser block or extension in order to completely cut out the box.

Model – 04 | Heart Throb | Two Drawer Box Pattern

Model – 04 | Heart Throb | Two Drawer Box Pattern

*
1) My patterns are not set to ship automatically. As soon as I receive the order, I will send the pattern in PDF format attached to an e-mail.
2) This pattern is cut from a block made up of four 4/4” boards. Giving a total thickness of approximately 3 1/2”.
3) When using a 14″ or smaller band saw, this pattern requires a 6″ riser block or extension in order to completely cut out the box.

Model – 34 | Heart Shaped | 10 Drawer Box | 4 Necklace Drawers Pattern

Model - 34 | Heart Shaped | 10 Drawer Box | 4 Necklace Drawer Pattern

*
1) My patterns are not set to ship automatically. As soon as I receive the order, I will send the pattern in PDF format attached to an e-mail.
2) This pattern is cut from a block made up of four 4/4” boards. Giving a total thickness of approximately 3 1/2”.
3) When using a 14″ or smaller band saw, this pattern requires a 6″ riser block or extension in order to completely cut out the box.